Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


E144966
  1. Measure the resistance of the speaker.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    4 Ω

    If the result is not as specified, replace the speaker assembly.



2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
  1. When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

    OK:
    Malfunction disappear.

    HINT:
    1. Connect all connectors to the speakers.
    2. When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.
    3. Perform the inspection above on both LH and RH sides.