NAVIGATION SYSTEM (for DVD) > Radio Broadcast cannot be Received or Poor Reception |
| 1.CHECK NAVIGATION RECEIVER ASSEMBLY |
Check the radio automatic station search function.
Check the radio automatic station search function by activating it.
|
| ||||
| OK | ||
| ||
| 2.CHECK OPTIONAL COMPONENTS |
Check for optional components (sun-shade film, telephone antenna, etc.).
Check if any optional components that may decrease reception capacity, such as sunshade film or a telephone antenna, are installed.
|
| ||||
| OK | ||
| ||
| 3.CHECK ANTENNA FOR NOISE PRODUCTION |
With the ignition switch ON, turn on the radio and choose the AM mode.
Place the tip of a screwdriver on the antenna and check that noise is heard from the speakers.
|
| ||||
| OK | ||
| ||
| 4.CHECK NAVIGATION RECEIVER ASSEMBLY |
![]() |
Connector Type:
Remove the antenna connector of the navigation receiver.
![]() |
Plug Type:
Remove the antenna plug of the navigation receiver.
With the navigation receiver connector connected, turn the ignition switch to ACC.
Turn on the radio and choose the AM mode.
Place a flat-head screwdriver or a piece of metal, such as a thin wire, on the antenna jack of the navigation receiver. Check that noise is heard from the speakers.
|
| ||||
| OK | ||
| ||