CAMSHAFT OIL CONTROL VALVE > ON-VEHICLE INSPECTION |
| 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Connect the intelligent tester to the DLC3.
Start the engine.
Turn the tester on.
Inspect the oil control valve (for intake camshaft).
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).
Check the engine speed when the oil control valve is operated using the intelligent tester with the engine coolant temperature 50°C (122°F) or less.
| Condition | Specified Condition |
| Oil control valve OFF | Normal engine speed |
| Oil control valve ON | Rough idle or engine stalled (soon after oil control valve switched from OFF to ON) |
Inspect the oil control valve (for exhaust camshaft).
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).
Check the engine speed when the oil control valve is operated using the intelligent tester with the engine coolant temperature 50°C (122°F) or less.
| Condition | Specified Condition |
| -128% (Oil control valve OFF) | Normal engine speed |
| 127% (Oil control valve ON) | Rough idle or engine stalled (soon after oil control valve switched from OFF to ON) |