Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (w/o Hood Moulding)

HEADLIGHT ASSEMBLY (w/o Hood Moulding) > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT ASSEMBLY LH


E174641
  1. Connect the connectors with the headlight.

  1. Install the 3 screws and bolt.



2. INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY
  1. Install the reinforcement and install the 2 bolts.

  1. Connect the 2 horns connectors.



3. INSTALL FRONT BUMPER COVER (w/o Under Guard)


B208306
  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 4 claws to install the bumper cover.

    HINT:
    The illustration only shows the LH side of the vehicle. The remaining claws are on the RH side.



    B209171
  1. Install the 8 screws and 4 clips.



    B209204
  1. Install the retainer.

    HINT:
    Use the same procedure for the RH and LH sides.

  1. Position the groove on the pin hold clip vertically and insert the clip to install it.

    NOTICE:
    Make sure that the groove on the pin hold clip is positioned vertically.

    HINT:
    Use the same procedure for the RH and LH sides.



4. INSTALL FRONT BUMPER COVER (w/ Under Guard)


B208306
  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 4 claws to install the bumper cover.

    HINT:
    The illustration only shows the LH side of the vehicle. The remaining claws are on the RH side.



    B209171
  1. Install the 8 screws and 4 clips.



    B209204
  1. Install the retainer.

    HINT:
    Use the same procedure for the RH and LH sides.

  1. Position the groove on the pin hold clip vertically and insert the clip to install it.

    NOTICE:
    Make sure that the groove on the pin hold clip is positioned vertically.

    HINT:
    Use the same procedure for the RH and LH sides.



5. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)


B208332
  1. Install the splash shield with the nut, bolt and screw.



6. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)

HINT:
Use the same procedure described for the LH side.



7. INSTALL RADIATOR GRILLE PROTECTOR


B209174
  1. Install the 2 radiator grille protectors.



8. INSTALL HOOD CENTER CUSHION


B209173
  1. Install the hood cushion.



9. INSTALL RADIATOR SUPPORT OPENING COVER


B209240
  1. Install the radiator support opening cover with the 9 clips.



10. ADJUST HEADLIGHT AIMING
  1. Adjust the headlight aiming (Click here ).