Home › ENGINE ยท 2GR-FE › FUEL › FUEL PUMP RESISTOR

FUEL PUMP RESISTOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE FUEL PUMP RESISTOR COVER
  1. Remove the cover from the resistor.



3. REMOVE FUEL PUMP RESISTOR


A137894
  1. Disconnect the connector.

  1. Remove the 2 bolts and resistor.