Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER

CIGARETTE LIGHTER > INSTALLATION



1. INSTALL CIGARETTE LIGHTER ASSEMBLY


    B110252
  1. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the bezel stay.



2. INSTALL CIGARETTE LIGHTER COVER
  1. Attach the 2 claws to install the cigarette lighter cover.



  1. Connect the connector.


    B133578



3. INSTALL SWITCH BASE


    B129882
  1. Connect the connectors.

  1. Attach the 2 clips and 2 claws to install the switch base.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL