CIGARETTE LIGHTER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SWITCH BASE |
![]() |
Detach the 2 clips and 2 claws.
Disconnect the connectors and remove the switch base.
| 3. REMOVE CIGARETTE LIGHTER COVER |
Detach the 2 claws and remove the bezel stay.

| 4. REMOVE CIGARETTE LIGHTER ASSEMBLY |
![]() ![]() |
Rotate the socket to disengage the notch.
Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the bezel stay.
Remove the socket from the bezel stay.