RADIO RECEIVER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.
Disconnect the connector.
| 3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() |
Using a moulding remover, detach the 3 clips and 2 claws, and then remove the cluster finish panel.
Disconnect the connector.
| 4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (except 3ZR-FAE) |
w/o Stereo Opening Cover:
Remove the 4 bolts.
Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the radio receiver.

Disconnect all connectors and remove the radio receiver with bracket.
w/ Stereo Opening Cover:
Remove the 4 bolts.
Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the radio receiver.

Disconnect all connectors and remove the radio receiver with bracket.
| 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
w/o Stereo Opening Cover:
Detach the 4 claws and remove the instrument cluster finish panel.

w/ Stereo Opening Cover:
Detach the 4 claws and remove the instrument cluster finish panel.

| 6. REMOVE NO. 1 RADIO BRACKET (except 3ZR-FAE) |
![]() |
w/o Stereo Opening Cover:
Remove the 4 bolts and No. 1 radio bracket from the radio receiver.
![]() |
w/ Stereo Opening Cover:
Remove the 4 bolts, radio receiver panel LH and No. 1 radio bracket from the radio receiver.
| 7. REMOVE NO. 2 RADIO BRACKET (except 3ZR-FAE) |
![]() |
w/o Stereo Opening Cover:
Remove the 4 bolts and No. 2 radio bracket from the radio receiver.
![]() |
w/ Stereo Opening Cover:
Remove the 4 bolts, radio receiver panel RH and No. 2 radio bracket from the radio receiver.
| 8. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for 3ZR-FAE) |
Remove the 4 bolts.
Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the radio receiver.

Disconnect the all connectors and remove the radio receiver with bracket.
| 9. REMOVE NO. 1 RADIO BRACKET (for 3ZR-FAE) |
![]() |
Remove the 4 bolts and No. 1 radio bracket from the radio receiver.
| 10. REMOVE NO. 2 RADIO BRACKET (for 3ZR-FAE) |
![]() |
Remove the 4 bolts and No. 2 radio bracket from the radio receiver.