Home › ENGINE · 2GR-FE › FUEL › FUEL PUMP RESISTOR

FUEL PUMP RESISTOR > INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP RESISTOR


  1. Inspect the fuel pump resistor resistance.



      A050482E01
    1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.26 to 0.30 Ω

      If the result is not as specified, replace the fuel pump.