Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > INSTALLATION

for Preparation Click here


HINT:
When installing the emblem and name plate, heat the vehicle body, back door outside garnish, emblem and name plate using a heat light.

Standard:
Item
Specified Condition
Vehicle body
40 to 60°C (104 to 140°F)
Back door outside garnish
20 to 30°C (68 to 86°F)
Emblem
20 to 30°C (68 to 86°F)
Name plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, back door outside garnish, emblem and name plate excessively.



1. INSTALL NO. 1 BACK DOOR EMBLEM ASSEMBLY (w/ Tire Carrier)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new emblem.

    1. Using a heat light, heat the vehicle body and a new emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the emblem in the position shown in the illustration.

      HINT:
      Press the emblem firmly to install it.



      B208942E01

      Standard:
      Area
      Specified Condition
      A
      157.5 mm (6.20 in.)
      B
      92.8 mm (3.65 in.)



2. INSTALL BACK DOOR NAME PLATE (w/ Tire Carrier)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the peeling paper from the face of the name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate in the position shown in the illustration.

      HINT:
      Press the name plate firmly to install it.



      B208943E01

      Standard:
      Area
      Specified Condition
      A
      25.3 mm (0.996 in.)
      B
      9.3 mm (0.366 in.)



3. INSTALL NO. 1 BACK DOOR EMBLEM (w/ Tire Carrier)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new emblem.

    1. Using a heat light, heat the vehicle body and a new emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the emblem in the position shown in the illustration.

      HINT:
      Press the emblem firmly to install it.



      B208944E01

      Standard:
      Area
      Specified Condition
      A
      8.2 mm (0.328 in.)
      B
      138.0 mm (5.43 in.)



4. INSTALL NO. 1 BACK DOOR NAME PLATE (w/o Tire Carrier)
  1. Clean the back door outside garnish surface.

    1. Using a heat light, heat the back door outside garnish surface.

    2. Remove the double-sided tape from the back door outside garnish.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the back door outside garnish and a new name plate.

    2. Remove the peeling paper from the face of the name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Align the boss positions and install the name plate.

      HINT:
      Press the name plate firmly to install it.



      B209166E01



5. INSTALL NO. 3 BACK DOOR NAME PLATE (w/o Tire Carrier)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the peeling paper from the face of the name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate in the position shown in the illustration.

      HINT:
      Press the name plate firmly to install it.



      B208947E01

      Standard:
      Area
      Specified Condition
      A
      71.5 mm (2.81 in.)
      B
      12.6 mm (0.496 in.)



6. INSTALL NO. 2 BACK DOOR EMBLEM (w/o Tire Carrier)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new emblem.

    1. Using a heat light, heat the vehicle body and a new emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the emblem in the position shown in the illustration.

      HINT:
      Press the emblem firmly to install it.



      B208949E01

      Standard:
      Area
      Specified Condition
      A
      66.6 mm (2.62 in.)
      B
      7.2 mm (0.283 in.)



7. INSTALL NO. 4 BACK DOOR NAME PLATE (for 4WD)
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the peeling paper from the face of the name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate in the position shown in the illustration.

      HINT:
      Press the name plate firmly to install it.



      B208953E01

      Standard:
      Area
      Specified Condition
      A
      8 mm (0.315 in.)
      B
      8.6 mm (0.339 in.)
      C
      66.6 mm (2.62 in.)
      D
      37.2 mm (1.46 in.)