Home › BODY › ENGINE HOOD / DOOR › HOOD (w/ Hood Moulding)

HOOD (w/ Hood Moulding) > REMOVAL

for Preparation Click here



1. REMOVE FRONT HOOD MOULDING ASSEMBLY


B254747
  1. Remove the 6 nuts and front hood moulding.



2. REMOVE HOOD INSULATOR


    B252928
  1. Using a clip remover, remove the 8 clips.

  1. Detach the 2 claws and remove the hood insulator.



3. REMOVE NO. 1 HOOD TO FRONT END PANEL SEAL


    B252929
  1. Using a clip remover, detach the 5 clips and remove the No. 1 hood to front end panel seal.



4. REMOVE WASHER NOZZLE SUB-ASSEMBLY


5. DISCONNECT WINDSHIELD WASHER HOSE


    B255802
  1. Detach the 3 clamps and disconnect the washer hose.



6. REMOVE AUXILIARY CATCH RELEASE LEVER ASSEMBLY


    B252930
  1. Remove the hood auxiliary catch hook rod as indicated by the arrow the illustration.



    B252932
  1. Remove the bolt.

  1. Detach the claw and remove the release lever.



7. REMOVE HOOD AUXILIARY CATCH HOOK ASSEMBLY


    B252933
  1. Remove the 2 bolts and hook.



8. REMOVE HOOD SUB-ASSEMBLY


    B255913E01
  1. Remove the 4 bolts and hood.



9. REMOVE HOOD HINGE ASSEMBLY LH


B255914
  1. Remove the 2 bolts and hood hinge.



10. REMOVE HOOD HINGE ASSEMBLY RH
  1. Remove the 2 bolts and hood hinge.



11. REMOVE RADIATOR SUPPORT OPENING COVER


B254515
  1. Remove the 9 clips and radiator support opening cover.



12. REMOVE HOOD AUXILIARY HOOK CATCH


    B252934
  1. Remove the 2 bolts and hood auxiliary hook catch.



13. REMOVE CUSHION RUBBER
  1. Remove the 4 cushion rubbers.