FUEL PUMP > INSPECTION |
| 1. INSPECT FUEL PUMP ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω |
| *1 | Component without harness connected (Fuel Pump) |
Inspect the operation of the fuel pump.
![]() |
Connect the positive (+) lead of the battery to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates.
| *1 | Component without harness connected (Fuel Pump) |