Home › ENGINE ยท 2GR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A090053E01
  1. Apply a light coat of engine oil to 4 new O-rings of the oil control valves.

  1. Install the O-rings to the 4 oil control valves.



    A172950E01
  1. Install the 4 oil control valves with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    Make sure that the O-ring is not cracked or jammed.

  1. Connect the 4 oil control valve connectors.



2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY
  1. Install the intake air surge tank assembly (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. INSPECT FOR OIL LEAK
  1. Start the engine, and check that there are no oil leaks.