CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > INSTALLATION |
| 1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
![]() |
Apply a light coat of engine oil to the O-ring of the oil control valve.
![]() |
Install the oil control valve with the bolt.
Connect the oil control valve connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. CHECK FOR ENGINE OIL LEAKS |
Start the engine, and check that there are no oil leaks.
| 4. INSTALL NO. 1 ENGINE COVER |
![]() |
Remove the 2 nuts and engine cover.