Home › ENGINE ยท 2GR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
  1. Remove the intake air surge tank assembly (Click here).



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A172950E01
  1. Disconnect the 4 oil control valve connectors.

  1. Remove the 4 bolts and 4 oil control valves.

  1. Remove the O-ring from each oil control valve.