Home › ENGINE ยท 2AZ-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 ENGINE COVER


    A124558
  1. Remove the 2 nuts and engine cover.



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A124556
  1. Disconnect the oil control valve connector.

  1. Remove the bolt and oil control valve.