Home
›
ENGINE · 2AZ-FE
›
ENGINE CONTROL SYSTEM
›
CAMSHAFT POSITION SENSOR
CAMSHAFT POSITION SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT CAMSHAFT POSITION SENSOR
Measure the resistance of the sensor.
Standard resistance:
Tester Connection
Specified Condition
1 (G+) - 2 (G-)
835 to 1,400 Ω at Cold
1 (G+) - 2 (G-)
1,060 to 1,645 Ω at Hot
NOTICE:
Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122 °F) and Hot is from 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the camshaft position sensor.