Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE HEATER TO REGISTER DUCT ASSEMBLY


    E124273
  1. Detach the 7 claws and register duct.



2. REMOVE AIR FILTER CASE


    E124286
  1. Detach the 2 claws and remove the air filter case.

  1. Remove the air filter.



3. REMOVE AIR INLET CONTROL SERVO MOTOR (for Manual Air Conditioning System)


    E127459
  1. Remove the 3 screws and air inlet servo motor.



4. REMOVE AIR INLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System)


    E127280
  1. Detach the claws and lever.



    E124275
  1. Remove the 3 screws and air inlet servo motor.



5. REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)


    E124284
  1. Remove the 2 screws and blower resistor.



6. REMOVE BLOWER MOTOR


    E124285
  1. Remove the 3 screws and blower motor.