BLOWER UNIT > REASSEMBLY |
| 1. INSTALL BLOWER MOTOR |
![]() |
Install the blower motor with the 3 screws.
| 2. INSTALL BLOWER RESISTOR (for Manual Air Conditioning System) |
![]() |
Install the blower resistor with the 2 screws.
| 3. INSTALL AIR INLET CONTROL SERVO MOTOR (for Manual Air Conditioning System) |
![]() |
Install the air inlet servo motor with the 3 screws.
| 4. INSTALL AIR INLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System) |
![]() |
Install the air inlet servo motor with the 3 screws.
![]() |
Attach the claw to install the lever.
| 5. INSTALL AIR FILTER CASE |
Install the air filter.
![]() |
Attach the 2 claws to install the air filter case.
| 6. INSTALL HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Attach the 7 claws to install the register duct.