Home › TRANSMISSION ยท K111F CVT › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Move the shift lever to N.



    C069809E03
  1. Loosen the 2 bolts of the park/neutral position switch.

  1. Align the protrusion with the neutral basic line.

  1. Hold the switch in that position and tighten the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

    Text in Illustration 
    *1
    Neutral Basic Line
    *2
    Protrusion

  1. After the adjustment, check the operation of the switch .