SHIFT AND SELECT LEVER SHAFT > DISASSEMBLY |
| 1. REMOVE INNER NO. 2 SHIFT LEVER |
Secure the shift and select lever shaft assembly in a vise between aluminum plates.
![]() |
Using a 5 mm pin punch and hammer, tap out the slotted spring pin and remove the inner No. 2 shift lever from the shift and select lever shaft.
| 2. REMOVE FRONT INNER SHIFT LEVER |
![]() |
Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the front inner shift lever.
| 3. REMOVE RELEASE HEAD |
![]() |
Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the release head.