Home › TRANSMISSION ยท EB61F MANUAL TRANSAXLE › SHIFT AND SELECT LEVER SHAFT

SHIFT AND SELECT LEVER SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE INNER NO. 2 SHIFT LEVER
  1. Secure the shift and select lever shaft assembly in a vise between aluminum plates.



    C204826
  1. Using a 5 mm pin punch and hammer, tap out the slotted spring pin and remove the inner No. 2 shift lever from the shift and select lever shaft.

    HINT:
    Make a note of the orientation of the inner No. 2 shift lever so that it can be reinstalled in the same position.



2. REMOVE FRONT INNER SHIFT LEVER


    C200227
  1. Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the front inner shift lever.



3. REMOVE RELEASE HEAD


    C204827
  1. Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the release head.