FUEL TANK > DISASSEMBLY |
| 1. REMOVE FUEL EMISSION HOSE |
![]() |
Disconnect the purge line hose, air inlet line hose and fuel emission hose from the fuel suction plate.
Pinch the retainer as shown in the illustration, and then disconnect the fuel emission hose from the fuel suction plate.
| 2. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Remove the joint clip and fuel tank main tube.
| 3. REMOVE FUEL TANK VENT TUBE SET PLATE |
![]() |
Remove the 8 bolts and set plate.
| 4. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY |
![]() |
Disconnect the fuel hose and remove the fuel suction with pump from the fuel tank.
![]() |
Remove the gasket from the fuel suction with pump.
| 5. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Remove the tube from the fuel tube clamps.
| 6. REMOVE FUEL EVAPORATION TUBE SUB-ASSEMBLY |
Remove the tube from the fuel tube clamps.
| 7. REMOVE NO. 1 FUEL TUBE CLAMP |
Remove the 4 tube clamps from the fuel tank.
| 8. REMOVE AIR INLET LINE TUBE |
![]() |
Detach the 2 clamps and remove the air inlet line tube from the fuel tank.
| 9. REMOVE NO. 1 FUEL TANK CUSHION |
![]() |
Remove the 7 fuel tank cushions from the fuel tank.
| 10. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
Remove the 5 screws and sender gauge.