FUEL TANK > DISASSEMBLY |
| 1. REMOVE FUEL EMISSION HOSE |
![]() |
Disconnect the purge line hose, air inlet line hose and fuel emission hose from the fuel suction plate.
| *1 | Purge Line Hose |
| *2 | Air Inlet Line Hose |
| *3 | Fuel Emission Hose |
| *4 | Retainer |
Pinch the retainer as shown in the illustration, and then disconnect the fuel emission hose from the fuel suction plate.
| 2. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Remove the joint clip and fuel tank main tube.
| 3. REMOVE FUEL TANK VENT TUBE SET PLATE |
![]() |
Remove the 8 bolts and set plate.
| 4. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY |
![]() |
Disconnect the fuel hose and remove the fuel suction with pump from the fuel tank.
![]() |
Remove the gasket from the fuel suction with pump.
| *1 | Gasket |
| 5. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Remove the tube from the fuel tube clamps.
| 6. REMOVE FUEL EVAPORATION TUBE SUB-ASSEMBLY |
Remove the tube from the fuel tube clamps.
| 7. REMOVE NO. 1 FUEL TUBE CLAMP |
Remove the 4 tube clamps from the fuel tank.
| 8. REMOVE AIR INLET LINE TUBE |
![]() |
Detach the 2 clamps and remove the air inlet line tube from the fuel tank.
| 9. REMOVE NO. 1 FUEL TANK CUSHION |
![]() |
Remove the 7 fuel tank cushions from the fuel tank.
| 10. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
Remove the 5 screws and sender gauge.
| 11. REMOVE NO. 3 FUEL TANK PROTECTOR |
![]() |
Detach the 2 claws and remove the protector.