FUEL TANK > REASSEMBLY |
| 1. INSTALL FUEL SENDER GAUGE ASSEMBLY |
![]() |
Install the sender gauge with the 5 screws.
| 2. INSTALL NO. 1 FUEL TANK CUSHION |
![]() |
Install 7 new fuel tank cushions onto the fuel tank as shown in the illustration.
| 3. INSTALL AIR INLET LINE TUBE |
![]() |
Attach the 2 clamps to install the air inlet line tube to the fuel tank.
| 4. INSTALL NO. 1 FUEL TUBE CLAMP |
![]() |
Install the 4 tube clamps to the fuel tank.
| 5. INSTALL FUEL EVAPORATION TUBE SUB-ASSEMBLY |
Install the tube to the fuel tube clamps.
| 6. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY |
Install the tube to the fuel tube clamps.
| 7. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY |
![]() |
Install a new gasket onto the fuel suction with pump.
![]() |
Connect the fuel hose with the paint mark facing towards the top of the vehicle, and then secure the clip.
Install the fuel suction with pump into the fuel tank.
| 8. INSTALL FUEL TANK VENT TUBE SET PLATE |
![]() |
Install the set plate with the 8 bolts.
| 9. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Install the fuel tube with the joint clip.
![]() |
| 10. INSTALL FUEL EMISSION HOSE |
![]() |
Connect the purge line hose, air inlet line hose to the fuel suction plate.
Connect the fuel emission hose to the fuel suction plate.