BATTERY CURRENT SENSOR > ON-VEHICLE INSPECTION |
| 1. CHECK BATTERY CURRENT SENSOR ASSEMBLY |
![]() |
Measure the resistance of the sensor.
| Tester Connection | Specified Condition |
| 2 (VC5) - 4 (E2) | 0.1 to 10 kΩ |
| 2 (VC5) - 3 (IB) | Below 0.5 kΩ |
| 3 (IB) - 4 (E2) | 0.05 to 10 kΩ |
![]() |
Measure the resistance of the sensor.
| Tester Connection | Condition | Specified Condition |
| 1 (THB) - 4 (E2) | 20 to 30°C (68 to 86°F) | 1.5 to 2.5 kΩ |