Home › BODY › EXTERIOR › REAR SPOILER

REAR SPOILER > INSTALLATION

for Preparation Click here


HINT:
When installing the spoiler, heat the vehicle body and spoiler using a heat light.

Standard:
Item
Temperature
Vehicle body
40 to 60°C (104 to 140°F)
Spoiler
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the body and spoiler excessively.



1. INSTALL CENTER STOP LIGHT


    B127945E01
  1. Install the center stop light with the 2 screws.



2. INSTALL REAR SPOILER
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

  1. If reusing the spoiler:
    Clean the spoiler.

    1. Using a heat light, heat the spoiler.

  1. Connect the center stop light connector.



    B127944
  1. Install the spoiler with 3 clips.



    B127943
  1. Install the 3 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



3. INSTALL BACK DOOR CENTER GARNISH


    B129944
  1. Attach the 4 claws and 4 clips to install the garnish.