DTC B1620/21 Driver Side - Side Airbag Sensor Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1620/21 | When one of following conditions is met:
|
|

| 1.CHECK DRIVER SIDE - SIDE AIRBAG SENSOR |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the driver side - side airbag sensor with the front passenger side - side airbag sensor and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Clear the DTCs (Click here).
Turn the ignition switch off.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Check the DTCs (Click here).
| Result | Proceed to |
| DTC B1620/21 and B1625/22 are not output. | A |
| DTC B1620/21 is output. | B |
| DTC B1625/22 is output. | C |
|
| ||||
|
| ||||
| A | ||
| ||