DTC B1635/24 Front Passenger Side Rear Airbag Sensor Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1635/24 | When one of following conditions is met:
|
|

| 1.CHECK FRONT PASSENGER SIDE REAR AIRBAG SENSOR |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the front passenger side rear airbag sensor with the driver side rear airbag sensor and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Clear the DTCs (Click here).
Turn the ignition switch off.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Check the DTCs (Click here).
| Result | Proceed to |
| DTC B1630/23 and B1635/24 are not output. | A |
| DTC B1630/23 is output. | B |
| DTC B1635/24 is output. | C |
|
| ||||
|
| ||||
| A | ||
| ||