CLUTCH RELEASE CYLINDER (for 1AZ-FE) > INSTALLATION |
| 1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Install the clutch release cylinder with the 4 bolts.
| 2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
![]() |
Using a union nut wrench, connect the flexible hose tube.
| 3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir with brake fluid and bleed the clutch system (Click here).
| 4. INSPECT FLUID LEVEL |
![]() |
Check the fluid level and add fluid if necessary.
| 5. INSPECT FOR FLUID LEAK |
Check for leaks in the clutch system.