SPIRAL CABLE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING PAD ASSEMBLY |
for 1AZ-FE, 2AZ-FE
Remove the steering pad assembly (Click here).
for 3RZ-FE
Remove the steering pad assembly (Click here).
| 3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
| 4. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the nut and place matchmarks on the steering wheel and steering column.
![]() |
Using SST, remove the steering wheel.
| 5. REMOVE STEERING COLUMN COVER (LOWER) |
![]() |
Detach the 4 claws, release the tilt lever and remove the lower steering column cover.
![]() |
Detach the claw and remove the upper steering column cover.
| 6. REMOVE SPIRAL CABLE SUB-ASSEMBLY |
![]() |
Rise the steering column cover (upper).
![]() |
Detach the 4 clips and remove the column cover (upper).
![]() |
Detach the 3 claws and remove the spiral cable.