CENTER AIRBAG SENSOR ASSEMBLY > INSTALLATION |
| 1. INSTALL CENTER AIRBAG SENSOR ASSEMBLY |
![]() |
Install the airbag sensor with the 3 bolts.
Connect the airbag sensor connectors.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
Connect the connector.
![]() |
Install the rear console box with the 2 bolts and attach the wire harness clamp.
![]() |
Install the 2 screws.
| 3. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER LH |
![]() |
Attach the 2 claws to install the instrument panel bracket cover.
| 4. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER RH |
![]() |
Attach the 2 claws to install the instrument panel bracket cover.
| 5. INSTALL CONSOLE REAR END PANEL |
![]() |
Attach the 6 claws to install the console rear end panel.
| 6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Attach the 4 clips to install the upper rear console panel.
| 7. INSTALL CONSOLE CUP HOLDER BOX |
![]() |
Attach the 2 clips to install the cup holder box.
Install the 2 screws.
| 8. INSTALL SWITCH BASE |
![]() |
Connect the connectors.
Attach the 2 clips and 2 claws to install the switch base.
| 9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Attach the 4 clips to install the upper rear console panel.
| 10. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH |
![]() |
Attach the 4 clips to install the upper panel garnish.
| 11. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH |
![]() |
Attach the 4 clips to install the upper panel garnish.
| 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 13. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).