Home › BRAKE › BRAKE › REAR BRAKE

REAR BRAKE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



3. DISCONNECT REAR FLEXIBLE HOSE


C127076
  1. Remove the union bolt and gasket.

  1. Disconnect the flexible hose from the brake cylinder.



4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY


C127286
  1. Remove the 2 bolts and cylinder.