REAR SEAT OUTER BELT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY OUTER LH |
![]() |
Align the claws with the seat belt positioning holes, and install the retractor of the seat belt with the 2 bolts as shown in the illustration.
![]() |
Connect the shoulder anchor with the bolt.
| 2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (for Short Body) |
![]() |
Attach the 7 clips to install the garnish.
| 3. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (for Long Body) |
![]() |
Attach the 7 clips to install the garnish.
| 4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for Short Body) |
![]() |
Install the belt hanger to the trim board.
Connect the power outlet socket connector.
Attach the 5 clips and 5 claws to install the trim board.
Install the bolt and 2 screws.
![]() |
Connect the rear No.1 seat belt's floor anchor.
Connect the floor anchor with the bolt.
Install the anchor cover.
| 5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for Long Body) |
![]() |
Install the belt hanger to the trim board.
Connect the power outlet socket connector.
Attach the 4 clips and 5 claws to install the trim board.
Install the 2 screws and 2 bolts.
![]() |
Connect the rear No.1 seat belt's floor anchor.
Connect the floor anchor with the bolt.
Install the anchor cover.
| 6. CONNECT REAR NO. 1 SEAT BELT ASSEMBLY OUTER LH |
![]() |
Connect the seat belt's floor anchor with the bolt.
Attach the lap belt outer anchor cover.
| 7. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET (for Short Body) |
| 8. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER (for Short Body) |
| 9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 10. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH |
| 11. INSTALL REAR FLOOR FINISH PLATE (for Short Body) |
![]() |
Attach the 6 clips to install the finish plate.
| 12. INSTALL REAR FLOOR FINISH PLATE (for Long Body) |
![]() |
Attach the 2 claws and 6 clips to install the finish plate.
| 13. INSTALL BACK DOOR WEATHERSTRIP |
| 14. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Short Body) |
![]() |
Attach the 7 clips to install the side plate.
Install the 4 screws.
| 15. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Long Body) |
![]() |
Attach the 7 clips to install the side plate.
Install the 4 screws.
| 16. INSTALL JACK CARRIER ASSEMBLY (for Short Body) |
![]() |
Install the jack carrier with the 7 clips.
| 17. INSTALL REAR FLOOR NO. 3 BOARD |
| 18. INSTALL REAR FLOOR NO. 2 BOARD |
| 19. INSTALL DECK BOARD ASSEMBLY |
| 20. INSTALL REAR FLOOR NO. 1 BOARD |
| 21. INSTALL TONNEAU COVER ASSEMBLY |
| 22. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY |
| 23. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 24. INSTALL REAR DOOR SCUFF PLATE LH (for Short Body) |
![]() |
Attach the 8 claws to install the scuff plate.
| 25. INSTALL REAR DOOR SCUFF PLATE LH (for Long Body) |
![]() |
Attach the 9 claws and 2 clips to install the scuff plate.
| 26. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |