Home
›
HEATER & AIR CONDITIONING SYSTEM
›
AIR CONDITIONING
›
SOLAR SENSOR (for Automatic Air Conditioning System)
SOLAR SENSOR (for Automatic Air Conditioning System) > REMOVAL
for Preparation
Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. REMOVE SOLAR SENSOR
Using a screwdriver, pull out the solar sensor, then disconnect the connector.
HINT:
Tape the screwdriver tip before use.