DTC B1443/43 Air Outlet Damper Control Servo Motor Circuit |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1443/43 | Air outlet damper position does not change even if air conditioning amplifier operates air outlet damper control servo motor |
|

| 1.READ VALUE USING INTELLIGENT TESTER (AIR OUT PULSE) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester main switch ON.
Select the items below in the Data List, and read the value displayed on the intelligent tester.
| Item | Measurement Item / Display (Range) | Normal Condition | Diagnostic Note |
| Air Out Pulse | Air outlet servo motor target pulse / Min.: 0, Max.: 255 | Customized value displayed | - |
| Result | Proceed to |
| NG | A |
| OK (Checking from PROBLEM SYMPTOMS TABLE) | B |
| OK (Checking from DTC) | C |
|
| ||||
|
| ||||
| A | |
| 2.REPLACE AIR OUTLET CONTROL SERVO MOTOR |
|
| ||||
| OK | ||
| ||