Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (w/o Hood Moulding)

HEADLIGHT ASSEMBLY (w/o Hood Moulding) > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 HEADLIGHT BULB


B131412
  1. Turn the bulb in the direction indicated by the arrow and pull to remove it.



2. REMOVE NO. 2 HEADLIGHT BULB


B131416
  1. Turn the bulb in the direction indicated by the arrow and pull to remove it.



3. REMOVE CLEARANCE LIGHT BULB


E173838
  1. Turn the bulb in the direction indicated by the arrow and pull to remove it.



4. REMOVE CLEARANCE LIGHT SOCKET
  1. Remove the bulb from the socket.



5. REMOVE FRONT TURN SIGNAL LIGHT BULB


B131418
  1. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.



6. REMOVE FRONT TURN SIGNAL LIGHT SOCKET
  1. Remove the bulb from the socket.



7. REMOVE HEADLIGHT COVER SEAL LH
  1. Remove the headlight cover seal LH.