Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (w/o Hood Moulding)

HEADLIGHT ASSEMBLY (w/o Hood Moulding) > REASSEMBLY

for Preparation Click here



1. INSTALL HEADLIGHT COVER SEAL LH
  1. Install the new headlight cover seal LH.



2. INSTALL FRONT TURN SIGNAL LIGHT SOCKET
  1. Install the bulb to the socket.



3. INSTALL FRONT TURN SIGNAL LIGHT BULB


B131419
  1. Insert the bulb/socket unit into the headlight.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.



4. INSTALL CLEARANCE LIGHT SOCKET
  1. Install the bulb to the socket.



5. INSTALL CLEARANCE LIGHT BULB


E173841
  1. Turn the bulb in the direction indicated by the arrow to install it.



6. INSTALL NO. 2 HEADLIGHT BULB


B131417
  1. Insert the bulb into the headlight.

  1. Turn the bulb in the direction indicated by the arrow to install it.



7. INSTALL NO. 1 HEADLIGHT BULB


B131413
  1. Insert the bulb into the headlight.

  1. Turn the bulb in the direction indicated by the arrow to install it.