CHARGING SYSTEM > Noise Occurs from Generator while Engine is Running |
| 1.CHECK LOOSENESS OF V-RIBBED BELT |
Check the tension of the belt by pushing it down with a finger.
|
| ||||
| OK | |
| 2.CHECK V-RIBBED BELT FOR WEAR |
Check the V-ribbed belt for wear.
|
| ||||
| OK | |
| 3.CHECK CLUTCH PULLEY FOR WEAR |
Check the clutch pulley grooves for wear or other defects.
|
| ||||
| OK | |
| 4.CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING |
Perform a driving test and check if noise occurs when decelerating.
|
| ||||
| OK | ||
| ||