HEADLIGHT LEVELING SWITCH > INSPECTION |
| 1. INSPECT HEADLIGHT LEVELING SWITCH |
![]() |
Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 4.
| Tester Connection | Switch Condition | Specified Condition |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 0 | 0.87 to 0.93 V |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 1 | 0.76 to 0.82 V |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 2 | 0.66 to 0.72 V |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 3 | 0.55 to 0.61 V |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 4 | 0.44 to 0.50 V |
| 1 (+B) - 4 (E) 2 (T) - 4 (E) | 5 | 0.34 to 0.40 V |
Inspect the switch illumination.
Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 4(E), then check that the light comes on.