PARKING BRAKE ASSEMBLY > INSPECTION |
| 1. CHECK BRAKE DISC INSIDE DIAMETER |
![]() |
Using a drum gauge or equivalent, measure the inside diameter of the disc.
| 2. CHECK PARKING BRAKE SHOE LINING THICKNESS |
![]() |
Using a ruler, measure the shoe lining thickness.
| 3. CHECK BRAKE DISC AND PARKING BRAKE SHOE LINING FOR PROPER CONTACT |
![]() |
Apply chalk to the inside surface of the disc. Touch the brake shoe to the disc and check that there is full contact between the brake shoe and disc (white chalk is transferred to the entire brake shoe).
If the contact is not as specified, use a shoe grinder to repair the brake shoe, or replace the brake shoe assembly.