Home › ENGINE ยท 2AZ-FE › IGNITION › IGNITION COIL

IGNITION COIL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 ENGINE COVER


    A112206
  1. Remove the 2 nuts and cover.



3. REMOVE IGNITION COIL ASSEMBLY
  1. Disconnect the 4 ignition coil connectors.



    A124400
  1. Remove the 4 bolts and 4 ignition coils.