OIL PUMP > INSPECTION |
| 1. INSPECT OIL JET |
![]() |
Check the oil jet for damage or clogging.
If necessary, repair the cylinder block.
| 2. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Check the relief valve.
Coat the valve with engine oil, and then check that the valve falls smoothly into the valve hole by its own weight.
If it does not, replace the relief valve. If necessary, replace the oil pump assembly.
| 3. INSPECT OIL PUMP ROTOR |
![]() |
Check the side clearance.
Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge.
![]() |
Check the tip clearance.
Using a feeler gauge, measure the clearance between the drive and driven rotor tips.
![]() |
Check the body clearance.
Using a feeler gauge, measure the clearance between the driven rotor and pump body.
| 4. INSPECT OIL PUMP DRIVE CHAIN AND 2 OIL PUMP SPROCKETS |
![]() |
Using vernier calipers, measure the length of the 8 links with the chain fully stretched.
Wrap the chain around the oil pump sprocket.
![]() |
Using vernier calipers, measure the sprocket diameter with the chain.
| 5. INSPECT CHAIN TENSIONER PLATE |
![]() |
Measure the chain tensioner plate wear.