Home › ENGINE ยท 1AZ-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP ROTOR
  1. Remove the oil pump rotor.

  1. Coat the drive rotor and driven rotor with engine oil.



    B011423E02
  1. Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.



2. INSTALL OIL PUMP COVER


    B011431E01
  1. Install the oil pump cover with the 5 bolts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }



3. INSTALL OIL PUMP RELIEF VALVE


    A052074E02
  1. Coat the relief valve with engine oil.

  1. Insert the relief valve and spring into the pump body hole.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



4. INSTALL OIL PUMP STRAINER


    B011430E01
  1. Install a new gasket and the oil pump strainer with the 2 nuts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }