OIL PUMP > REASSEMBLY |
| 1. INSTALL OIL PUMP ROTOR |
Coat the drive rotor and driven rotor with engine oil.
![]() |
Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.
| 2. INSTALL OIL PUMP COVER |
![]() |
Install the oil pump cover with the 5 bolts.
| 3. INSTALL OIL PUMP RELIEF VALVE |
![]() |
Coat the relief valve with engine oil.
Insert the relief valve and spring into the pump body hole.
Using a 27 mm socket wrench, install the plug.
| 4. INSTALL OIL PUMP STRAINER |
![]() |
Install a new gasket and the oil strainer with the 2 nuts.