ENGINE OIL COOLER (w/ Oil Cooler) > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
Remove the radiator reservoir cap.
Loosen the cylinder block drain cock plug.

| 3. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil drain plug and drain the oil into a container.
| 4. REMOVE OIL FILTER SUB-ASSEMBLY |
![]() |
Using SST, remove the oil filter.
| 5. REMOVE ENGINE OIL COOLER |
![]() |
Disconnect the 2 oil cooler hoses from the oil cooler.
Remove the union bolt, plate washer, nut, oil cooler and O-ring.