Home › ENGINE ยท 2AZ-FE › ENGINE MECHANICAL › TIMING CHAIN

TIMING CHAIN > REPLACEMENT

for Preparation Click here



1. REPLACE TIMING CHAIN COVER OIL SEAL


    A032626E01
  1. Using a screwdriver and hammer, tap out the oil seal.

  1. Place the oil seal retainer on wooden blocks.

  1. Apply multi-purpose grease to the lip of a new oil seal.

    NOTICE:
    Keep the lip free of foreign objects.



    A094547E01
  1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear case edge.

    SST
    09223-22010  

    NOTICE:
    Do not tap the oil seal at an angle.