CRUISE CONTROL MAIN SWITCH (for 3ZR-FAE) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING PAD ASSEMBLY |
![]() |
Straighten the front wheels.
Using a thin-bladed screwdriver, push open the spring clips and disengage the pins.
![]() |
Pull out the steering pad from the steering wheel and support the steering pad with one hand as shown in the illustration.
Using a screwdriver, disconnect the 2 airbag connectors.
Disconnect the horn connector and remove the steering pad.
| 3. REMOVE CRUISE CONTROL MAIN SWITCH |
![]() |
Disconnect the connector.
Remove the 2 screws and switch.