Home › BODY › INSTRUMENT PANEL › UPPER INSTRUMENT PANEL

UPPER INSTRUMENT PANEL > INSTALLATION

for Preparation Click here



1. INSTALL UPPER INSTRUMENT PANEL
  1. Attach the 6 clips and 5 claws to install the instrument panel.

  1. Connect the connector and attach the clamp.

  1. Install the 2 bolts and 2 screws.



  1. Connect the passenger airbag connector.


    B208364



    B129886
  1. Install the 2 bolts to the passenger airbag.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    B129887
  1. Attach the 2 hinges to install the door.



    B129889E03
  1. Attach the claw to the glove compartment door stopper.

  1. While pushing in the sides of the glove compartment door in the direction indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.



3. INSTALL FRONT PILLAR GARNISH LH
  1. for Short Body:
    Install the front pillar garnish .

  1. for Long Body:
    Install the front pillar garnish .



4. INSTALL FRONT PILLAR GARNISH RH
  1. for Short Body:
    Install the front pillar garnish .

  1. for Long Body:
    Install the front pillar garnish .



5. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY CENTER


B129890
  1. Attach the 5 clips to install the instrument panel register.



6. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)


B133002
  1. Attach the 4 clips to install the stereo opening cover.

  1. Install the 4 bolts.



7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
  1. for 3ZR-FAE
    Install the radio receiver assembly with bracket .

  1. for 3ZR-FAE
    Install the radio receiver assembly with bracket .



8. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)
  1. for DVD:
    Install the navigation receiver assembly with bracket .

  1. for HDD:
    Install the navigation receiver assembly with bracket .



9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210523
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210524
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



11. INSTALL COMBINATION METER ASSEMBLY


    B129873
  1. Connect the connector.

  1. Attach the 2 clips to install the combination meter.

  1. Install the 2 screws.



12. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B129872
  1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.



13. INSTALL STEERING WHEEL ASSEMBLY (for LHD)


    C195903E01
  1. Align the matchmarks and install the steering wheel to the steering column.

  1. Install the nut.

    Torque:
    50 N*m{ 510 kgf*cm , 37 ft.*lbf }

  1. Connect all the connectors to the spiral cable.



14. INSTALL STEERING WHEEL ASSEMBLY (for RHD)


    C203469E01
  1. Align the matchmarks and install the steering wheel to the steering column.

  1. Install the nut.

    Torque:
    50 N*m{ 510 kgf*cm , 37 ft.*lbf }

  1. Connect all the connectors to the spiral cable.



15. INSTALL STEERING WHEEL PAD ASSEMBLY
  1. for 1AZ-FE, 2AZ-FE:
    Install the steering wheel pad assembly (Click here).

  1. for 3ZR-FAE:
    Install the steering wheel pad assembly (Click here).



16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


17. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).