LOWER INSTRUMENT PANEL > DISASSEMBLY |
| 1. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
| 2. REMOVE FUSE BOX OPENING COVER (for LHD) |
![]() |
Detach the 2 claws and 2 clips, and then remove the cover.
| 3. REMOVE INSTRUMENT PANEL SAFETY PAD COVER (w/ Entry and Start System) |
![]() |
Using a screwdriver, detach the 4 claws and remove the instrument panel safety pad cover.
| 4. REMOVE INSTRUMENT PANEL SAFETY PAD COVER (w/o Entry and Start System) |
![]() |
Using a screwdriver, detach the 4 claws and remove the instrument panel safety pad cover.
| 5. REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR (for Automatic Air Conditioning System) |
![]() |
Detach the 2 claws and remove the cooler thermistor.
| 6. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
![]() |
Detach the 2 claws and remove the interior illumination light.
| 7. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
![]() |
Rotate the lights in the direction shown in the illustration, disconnect the 4 wire harness clamps and remove the interior illumination light.
| 8. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY |
![]() |
Detach the 4 wire harness clamps and remove the antenna cord.